The installation position of the automatic steel bar hoop bending machine should be as far away from the vibration source as possible. If the anti-vibration distance requirements cannot be met, vibration isolation measures should be taken to control the impact of vibration within the allowable range. The vibration isolation efficiency should be determined according to the distance of the vibration source and the vibration control requirements of the steel bar hoop bending machine. Attention should also be paid to ensure that the steel bar hoop bending machine does not produce obvious shaking when it is working. When the steel bar hoop bending machine has different vibration control requirements, vibration-releasing pad iron can be used for vibration isolation, otherwise other effective vibration isolation measures should be taken.

Dimensions of steel bar bending machine

The steel bar hoop bending machine adopts the touch screen computer version programmable servo control system and touch screen input, which can complete the steel bar straightening, sizing, bending forming, cutting and other processes at one time, and can bend large diameter 12mm steel bars, and the two-way bending function can be made Stirrups of various shapes and sizes, easy to operate, accurate in size and high in production efficiency.

1. When the steel bar hoop bending machine performs steel bar bending, it cannot perform refueling operation and cannot remove equipment pollution, because it is easy to cause safety problems when performing other operations during equipment operation.

2. When using a steel bar bending machine, the steel bar cannot be bent beyond the specified diameter, and the speed should not be too fast, otherwise it is easy to cause damage to the equipment and cannot complete the bending work well.

3, due to the type of steel bar, between bending, it is necessary to pay attention to the type of steel, and then replace the corresponding mandrel, especially for high hardness or low alloy steel.